Residential Engineering Case
Flush Wall-Mount OLED & Concealed AV Wiring
Nocatee, FL
Modern Single-Family Residence (2,800 sq. ft.)
Verified Field Assessment
Photo: Original field engineering installationMetadata & exact GPS address stripped for client privacy
01 // Client Goal & Objective
Mount a 77-inch OLED TV flush against a living room accent wall with zero visible cords, power bricks, or hanging cables.
02 // Onsite Inspection Findings
Standard wall outlet was located 3 feet below the desired TV mounting height.
Soundbar and Apple TV wires were dangling down to a floor console.
Interior wall studs required reinforced blocking to support full-motion articulating bracket.
03 // Engineering Scope of Work
Installation of recessed in-wall power and low-voltage cable management box behind TV.
Fishing 48Gbps HDMI 2.1, optical audio, and Ethernet cables inside the drywalled wall cavity.
Precision laser leveling and secure mounting of ultra-slim TV and soundbar.
04 // Solution & Execution
We installed a recessed enclosure behind the display to conceal surge-protected power, Apple TV 4K, and excess cabling. All HDMI and network drops were run internally through stud cavities. The display sits just 0.8 inches from the drywall for a clean, architectural finish.
05 // Testing Protocol & Measured Outcome
Verification Procedure
Tested 4K 120Hz Dolby Vision and Dolby Atmos signal pass-through. Verified structural load test of mount bracket.
Verified Result
Flawless gallery-style TV installation with 100% concealed cables and clean home aesthetic.
Project Snapshot
- Location
- Nocatee, FL
- Object Type
- Modern Single-Family Residence (2,800 sq. ft.)
- Quality Standard
- 100% Tested & Certified
Equipment & Hardware
Recessed In-Wall Cable & Power EnclosureUltra-Slim Articulating Wall MountCertified 48Gbps In-Wall HDMI 2.1 Cables
Need a Similar Home Technology Setup?
We plan clean installations, confirm pricing, and document the finished setup.